Type 3 DOT Heavy Duty Silt Curtain For Tidal Water

Add to quote

Silt curtains are floating barriers used in marine construction, dredging, and reclamation projects to control the silt and sediment in a body of water. Silt curtains can be set up to keep construction areas in compliance and protect the environment.
 
JXY Silt Curtain Skirt is made by permeable or impermeable fabric and are fabricated to any size that will fit your specific application.JXY Silt Curtain can support customization. 

Features:

-Control of sediment and run off from marine construction sites;
-Easy to operation;
-Effectively protect ecological environment;

Type 3 Silt Curtain Should be used in areas where considerable current (up to 3 knots or 5 feet per second) may be present, where tidal action may be present, and/or where the curtain is potentially subject to wind and wave action. Floating Silt Barriers are used to control and contain silt and sediment within an immediate work area thereby preventing anything from floating outside of the dredging area and affecting marine life.  Floating Silt Barriers protect our waters and environment.

Type 3 DOT Heavy Duty / Tidal Water Floating Silt Barriers are normally used by DREDGING CONTRACTORS working in PORTS and surrounding waters.

Application:


- Harbors
- Ports
- Shoreline
- Offshore

Floating Turbidity Barriers are available in 20m per sections or any custom length up to 20m.the skirt can be as deep as required by project requirements.

A permeable skirt is important if there is the need to allow water to flow through while containing silt or turbidity. 
 
NOTE: Float size is determined by skirt depth and or your job requirements.