86-13819027011

Drain Warden-Drain Protection

The Drain Warden is a  very simple yet effective measure for preventing silt run off and rubbish from entering the storm water system. Leave as semi-permanent collection unit. Very easy to fit - just cut to suit you drain size.
The Drain Warden is an excellent defence for reducing and controlling the entrance of contaminants into our water systems.

Cars and trucks drip oil and grease on to the surface, which is carried into the catch basins by rain water. Eroded soil and wind blown debris, cigarette butts and ear plugs also usually end up in the drain system. Most of these catch basins ultimately drain into the sea, streams, lakes, or ground water aquifers. Held in place by the metal grate, the Drain Warden effectively removes coarse sediments, oil, grease, litter and debris from storm water.

 

EASY TO INSTALL with Guide supplied. When sizing allow for 50-100mm of the Drain Warden fabric to overhang the edges of the surface grate so re-installation after maintenance is made easier

 

EASY MAINTENANCE The Drain Warden is easy to maintain & will generally consist of cleaning out debris and sediment, and replacing the oil absorbent pack. These units can save hours of sump maintenance time. The Drain Wardens fits into most catch basins and can be installed by the user.


Features

 

Economical filter unit - easy to install and maintain
Remove pollutants quickly "at the source"
Sizes to fit most surface drains

Size

JXYDW-01 :  0.75m x 0.75m x 450mm Basin

JXYDW-02 : 1.2m x 1.2m skirt with 600mm basin.
Whats App Us